A changeover switch transfers a load between two supplies, usually mains and a generator, so that only one is ever connected. Automatic transfer switches change over on their own when the mains fails.
Most asked for: manual changeover switch, automatic changeover (ATS), 63 A, 100 A and 200 A, 4 pole changeover, on-load changeover.
An on-load changeover can be operated while current is flowing, and is what most buildings need. An off-load type must be switched only after the load is turned off.
A four pole switch changes over the neutral with the phases, which keeps the generator neutral and the mains neutral separate. That is what earth fault protection and most supply rules call for.

