🚚 Free delivery over ₹4,000 pan-India · we also ship worldwide · Buying in bulk? Get a quote in 24 hours →
ABB E213-25-002 Change over Switch · 2CCA703046R00012CCA703046R0001↓ 53% off MRP
BrandABB
CategorySwitchgear
SpecificationE213-25-002 · System Pro M
Brand SKU2CCA703046R0001
AvailabilityIn stock · ships in 24h
DeliveryPan-India · 7 working days
ABB· In stock
Visit the ABB store

ABB E213-25-002 Change over Switch · 2CCA703046R0001

NEW added this week
₹3,008/pcincl. GST-53%
₹2,549 + 18% GST · MRP ₹6,374
Add to cart
Buy now
  • Secured by Razorpay · UPI, cards, net banking, wallets
  • GST invoice, claim input tax credit
  • Tracked delivery, 5 to 7 working days
✓ Full brand warranty on every order
✓Lowest price guarantee · found it cheaper? We match it.
💳 30 Day credit facility available launching soon - join waitlist.
₹3,008 /pc incl. GST
Free delivery over ₹4,000

ABB E213-25-002 Change over Switch · 2CCA703046R0001: Elume price today ₹3,008 per pc incl. GST, 53% below the ₹6,374 MRP. The price has held steady for the last 30 days.

Price history
Elume price over time, day by day. Market comparison appears once we track this item.
16 Nov to 22 Nov
₹6,820₹5,814₹4,809₹3,803₹2,797₹6,374₹3,008
16 Nov17 Nov18 Nov19 Nov20 Nov21 Nov22 Nov
Elume today
₹3,008
MRP
₹6,374
Lowest in view · 17 Nov
₹3,008
🏷️
100% genuine
Brand-authorised stock with full manufacturer warranty
🧾
GST invoice
Tax invoice on every order · GST billing with tax split
🚚
Pan-India delivery
7 working days to your location
📦
Wholesale built in
Wholesale price at 15+ units: ₹2,858/pc on this product, applied automatically

Change over switches according DIN EN 60669-1, VDE 0632 Part 1, Rated currents: 16/25 A, 250 VACPDC, Contacts: 1 CO/2 CO, Module width: 0,5/1

As published by ABB. Verify critical parameters against the datasheet before specifying.
ABB ABB E213-25-002 Change over Switch · 2CCA703046R0001 · 2CCA703046R0001
Device typeChangeover switch
SeriesSystem Pro M
Poles2P (DP)
Rated current25 A
Reference standardEN60669-1
Country of originSwitzerland
BrandABB
Brand SKU2CCA703046R0001
ELINEDRMH2CRJR
Sold asPer pc
StandardsEN60669-1
Package Width96 mm
Product ClassCommand Devices
Package Height76 mm
Package Length185 mm
Number of Poles2
Rated Voltage (Ur)Minimum 24 V
Package Gross Weight82 g
Extended Product TypeE213-25-002
Rated Current El ED (In)25A
Product RangeSystem Pro M
Ratings as published by ABB (shop.in.abb.com listing for 2CCA703046R0001, 15 Nov 2026). Verify critical parameters against the datasheet before specifying.
Read: Contactor Sizing for 400 V and 415 V Motors: kW to Amps, AC-3 Ratings and Overload Relays →
What size contactor do I need for a 7.5 kW motor?
A 7.5 kW three-phase motor at 400 V draws about 14.5 A, so a contactor rated at least 16 to 18 A at AC-3 is the usual choice, with an overload relay set to the nameplate current.
What is the difference between AC-1 and AC-3?
AC-1 is the rating for resistive loads such as heaters; AC-3 is the rating for switching squirrel-cage motors in normal duty. Motors are always sized on the AC-3 figure, which is lower.
How many amps per kW for a three-phase motor?
At 400 V, roughly 2 A per kW for small motors, falling towards about 1.8 A per kW above 30 kW, because larger motors run at a better power factor and efficiency. Use the nameplate for the exact figure.
Which changeover switch do I need for a generator at home?

Use a changeover switch rated at least equal to your main incomer, with poles matching the supply (2 pole for single-phase, 4 pole for three-phase) so the neutral is also switched. This prevents generator power feeding back into the grid, which is dangerous for line workers, and installation should be done by a licensed electrician.

What is the difference between on-load and off-load changeover?

An on-load changeover switch is designed to transfer between mains and generator while current is flowing, while an off-load type must only be operated after the load is switched off. On-load types are safer and more convenient for most homes and shops; check the load rating on the product.

What is the difference between manual changeover and ATS?

A manual changeover needs someone to operate the handle when power fails, while an ATS (automatic transfer switch) senses mains failure and switches to the generator automatically, often also starting the DG set. ATS is used where unattended or quick changeover is needed.

Why does a changeover switch have a centre OFF position?

The centre OFF position ensures the load is fully disconnected from both sources before connecting to the other, so mains and generator can never be connected together. It is also used to isolate the load safely for maintenance.

Can I use a changeover switch for an inverter?

Yes, a changeover switch is often used to select between inverter output and mains, or to bypass the inverter during servicing. Size it for the circuits it will carry and make sure inverter output and mains are never paralleled.

No reviews yet