🚚 Free delivery over ₹4,000 pan-India · we also ship worldwide · Buying in bulk? Get a quote in 24 hours →
625006↓ 26% off MRP
BrandLegrand
CategorySwitchgear
Specification4P (FP)
Brand SKU625006
AvailabilityReady to ship · Only 4 left · Ships tomorrow
DeliveryPan-India · 5 working days
Legrand· Ready to ship
Visit the Legrand store

Legrand Spreader Link Set for DPX3 160 MCCB · 4P (FP) · 625006

NEW added this week
₹1,154/pcincl. GST-26%
₹978 + 18% GST · MRP ₹1,560
Add to cart
Buy now
Ready to shipOnly 4 left
Ships tomorrow. Delivery by Sat, 28 Nov.
In Delhi NCR? Get it today. Order before 1 pm for delivery the same day, after that the next day, for ₹400 extra. Choose Delhi NCR express at checkout.
  • Secured by Razorpay · UPI, cards, net banking, wallets
  • GST invoice, claim input tax credit
  • Tracked delivery, 5 to 7 working days
✓ Full brand warranty on every order
✓Lowest price guarantee · found it cheaper? We match it.
💳 30 Day credit facility available launching soon - join waitlist.
₹1,154 /pc incl. GST
Free delivery over ₹4,000

Legrand Spreader Link Set for DPX3 160 MCCB · 4P (FP) · 625006: Elume price today ₹1,154 per pc incl. GST, 26% below the ₹1,560 MRP. The price has held steady for the last 30 days.

Price history
Elume price over time, day by day. Market comparison appears once we track this item.
16 Nov to 22 Nov
₹1,669₹1,520₹1,371₹1,222₹1,073₹1,560₹1,154
16 Nov17 Nov18 Nov19 Nov20 Nov21 Nov22 Nov
Elume today
₹1,154
MRP
₹1,560
Lowest in view · 17 Nov
₹1,154
🏷️
100% genuine
Brand-authorised stock with full manufacturer warranty
🧾
GST invoice
Tax invoice on every order · GST billing with tax split
🚚
Pan-India delivery
7 working days to your location
📦
Wholesale built in
Wholesale price at 15+ units: ₹1,096/pc on this product, applied automatically

Legrand Spreader Link Set for DPX3 160 MCCB, 4P (FP). Legrand catalogue number 625006.

As published by Legrand. Verify critical parameters against the datasheet before specifying.
Legrand Legrand Spreader Link Set for DPX3 160 MCCB · 4P (FP) · 625006 · 625006
Device typeMiniature circuit breaker (MCB)
Poles4-pole
Reference standardIS/IEC 60898-1
BrandLegrand
Brand SKU625006
ELINE74CRFJKDD
Sold asPer pc
Other Legrand ranges and models in this category, closest in price to this one.
Read: Contactor Sizing for 400 V and 415 V Motors: kW to Amps, AC-3 Ratings and Overload Relays →
What size contactor do I need for a 7.5 kW motor?
A 7.5 kW three-phase motor at 400 V draws about 14.5 A, so a contactor rated at least 16 to 18 A at AC-3 is the usual choice, with an overload relay set to the nameplate current.
What is the difference between AC-1 and AC-3?
AC-1 is the rating for resistive loads such as heaters; AC-3 is the rating for switching squirrel-cage motors in normal duty. Motors are always sized on the AC-3 figure, which is lower.
How many amps per kW for a three-phase motor?
At 400 V, roughly 2 A per kW for small motors, falling towards about 1.8 A per kW above 30 kW, because larger motors run at a better power factor and efficiency. Use the nameplate for the exact figure.
When do I need an MCCB instead of an MCB?

MCBs typically go up to 63A or 125A, so MCCBs are used for higher currents (roughly 16A to 1600A), as main incomers of buildings, panels and sub-panels, or where higher breaking capacity and adjustable settings are needed. MCCBs are covered by IS/IEC 60947-2.

What is the difference between Icu and Ics?

Icu is the ultimate breaking capacity the MCCB can interrupt once, while Ics is the service breaking capacity it can interrupt and still remain usable. Choose an MCCB whose Icu exceeds the prospective fault current at the installation point; for critical feeders, a higher Ics (ideally 100% of Icu) is preferred.

Should I take a 3 pole or 4 pole MCCB?

Use 3 pole where only the phases need switching, and 4 pole where the neutral must also be isolated, such as generator changeover systems, incomers with unbalanced single-phase loads or where local rules require neutral isolation. Your panel designer or electrician should decide based on the earthing system.

Can I adjust the current setting of an MCCB?

Many MCCBs have an adjustable overload setting (for example 0.8 to 1 times the frame rating, or wider on electronic releases), and some allow short-circuit adjustment too. Fixed-release MCCBs cannot be adjusted, so check the release type before buying.

What accessories can be added to an MCCB?

Common add-ons include auxiliary and trip alarm contacts, shunt trip and undervoltage releases, rotary handles for door mounting, motor operators for remote switching, and terminal spreaders or extended terminals for larger cables. Accessories are usually specific to the brand and frame size.

No reviews yet