🚚 Free delivery over ₹4,000 pan-India · we also ship worldwide · Buying in bulk? Get a quote in 24 hours →
C&S Electric On Load Changeover Switch · K series · 4P · 630 A · Enclosed · E-CSCS630K4COE-CSCS630K4CO↓ 20% off MRP
BrandC&S Electric
CategorySwitchgear
Specification4P · 630 A · Enclosed
Brand SKUE-CSCS630K4CO
AvailabilityOn order · 2 to 3 weeks
DeliveryPan-India · 2 to 3 weeks
C&S Electric· On order, 2 to 3 weeks
Visit the C&S Electric store

C&S Electric On Load Changeover Switch · K series · 4P · 630 A · Enclosed · E-CSCS630K4CO

Rating: 630 A
Execution: Enclosed
NEW added this week
₹64,872/pcincl. GST-20%
₹54,976 + 18% GST · MRP ₹81,090
Add to cart
Buy now
On order: delivered in 2 to 3 weeks. We order it from C&S Electric for you once you place the order.
  • Secured by Razorpay · UPI, cards, net banking, wallets
  • GST invoice, claim input tax credit
  • Tracked delivery, 5 to 7 working days
✓ Full brand warranty on every order
✓Lowest price guarantee · found it cheaper? We match it.
💳 30 Day credit facility available launching soon - join waitlist.
₹64,872 /pc incl. GST
Delivery ₹1,000, ships insured

C&S Electric On Load Changeover Switch · K series · 4P · 630 A · Enclosed · E-CSCS630K4CO: Elume price today ₹64,872 per pc incl. GST, 20% below the ₹81,090 MRP. The price has held steady for the last 30 days.

Price history
Elume price over time, day by day. Market comparison appears once we track this item.
16 Nov to 22 Nov
₹86,766₹80,157₹73,549₹66,940₹60,331₹81,090₹64,872
16 Nov17 Nov18 Nov19 Nov20 Nov21 Nov22 Nov
Elume today
₹64,872
MRP
₹81,090
Lowest in view · 19 Nov
₹64,872
Same key specifications, different brands - matched on spec, never on looks. Tap a product to open it.Full comparison page →
Product
Type
Poles
Rating
Curve
Breaking capacity
Price
CHANGEOVER
FP (4 pole)
630 A
n/a
-
₹54,976 +GST /pc
₹64,872 incl. GST
Viewing above ↑
CHANGEOVER
FP (4 pole)
630 A
n/a
-
₹41,127 +GST /pc
₹48,530 incl. GST
CHANGEOVER
FP (4 pole)
630 A
n/a
-
₹54,321 +GST /pc
₹64,099 incl. GST
CHANGEOVER
FP (4 pole)
630 A
n/a
-
₹65,649 +GST /pc
₹77,466 incl. GST
For panel builders
Buying this for a panel?
The price above is for a single piece. Send the whole BOM in any file and a person quotes the job within 24 hours.
🏷️
100% genuine
Brand-authorised stock with full manufacturer warranty
🧾
GST invoice
Tax invoice on every order · GST billing with tax split
🚚
Pan-India delivery
7 working days to your location
📦
Wholesale built in
Wholesale price at 15+ units: ₹61,628/pc on this product, applied automatically

C&S Electric on load changeover switch, K series, 4 pole, 630 A, in a sheet steel enclosure, positions I-0-II, for switching a load between mains and generator supply. The operating handle and telescopic shaft come with the switch. C&S code E-CSCS630K4CO.

As published by C&S Electric. Verify critical parameters against the datasheet before specifying.
C&S Electric C&S Electric On Load Changeover Switch · K series · 4P · 630 A · Enclosed · E-CSCS630K4CO · E-CSCS630K4CO
Device typeOn load changeover switch
SeriesK series
Poles4P (FP)
Rated current630 A
Rated voltage415 V AC
Reference standardIS/IEC 60947-3
executionSheet steel enclosed
short time withstand17 kA for 1 s
utilisation categoryAC-23A
Current rating630 A
BrandC&S Electric
Brand SKUE-CSCS630K4CO
ELINE4GF9P2G99
Sold asPer pc
noteenclosed version: Ith in enclosure applies where given
ui_v1000
uimp_kv12
standardIS/IEC 60947-3
icw_1s_ka17
positionsI-0-II
icm_peak_ka80
icw_0_2s_ka38
ac22a_415v_a630
ac23_kw_415v315
ac23a_415v_a630
ac23a_440v_a590
ac23a_690v_a350
frequency_hz50 (brochure: 50/60)
ith_open_air_a630
ith_enclosure_a630
dims_4p_a1_x_b1_mm532 x 276
breaking_ac23_415v_a5040
utilisation_categoryAC-23A
door_interlock_padlockyes (price list: door interlock and padlock facility up to 800A)
rated_operational_voltage_v415
weight_4p_kg_with_handle_shaft7.6
Ratings as published by C&S Electric (C&S Electric price list, 22 Jan 2026; C&S Electric price list; C&S Electric brochure). Verify critical parameters against the datasheet before specifying.
Read: Contactor Sizing for 400 V and 415 V Motors: kW to Amps, AC-3 Ratings and Overload Relays →
What size contactor do I need for a 7.5 kW motor?
A 7.5 kW three-phase motor at 400 V draws about 14.5 A, so a contactor rated at least 16 to 18 A at AC-3 is the usual choice, with an overload relay set to the nameplate current.
What is the difference between AC-1 and AC-3?
AC-1 is the rating for resistive loads such as heaters; AC-3 is the rating for switching squirrel-cage motors in normal duty. Motors are always sized on the AC-3 figure, which is lower.
How many amps per kW for a three-phase motor?
At 400 V, roughly 2 A per kW for small motors, falling towards about 1.8 A per kW above 30 kW, because larger motors run at a better power factor and efficiency. Use the nameplate for the exact figure.
Which changeover switch do I need for a generator at home?

Use a changeover switch rated at least equal to your main incomer, with poles matching the supply (2 pole for single-phase, 4 pole for three-phase) so the neutral is also switched. This prevents generator power feeding back into the grid, which is dangerous for line workers, and installation should be done by a licensed electrician.

What is the difference between on-load and off-load changeover?

An on-load changeover switch is designed to transfer between mains and generator while current is flowing, while an off-load type must only be operated after the load is switched off. On-load types are safer and more convenient for most homes and shops; check the load rating on the product.

What is the difference between manual changeover and ATS?

A manual changeover needs someone to operate the handle when power fails, while an ATS (automatic transfer switch) senses mains failure and switches to the generator automatically, often also starting the DG set. ATS is used where unattended or quick changeover is needed.

Why does a changeover switch have a centre OFF position?

The centre OFF position ensures the load is fully disconnected from both sources before connecting to the other, so mains and generator can never be connected together. It is also used to isolate the load safely for maintenance.

Can I use a changeover switch for an inverter?

Yes, a changeover switch is often used to select between inverter output and mains, or to bypass the inverter during servicing. Size it for the circuits it will carry and make sure inverter output and mains are never paralleled.

No reviews yet