🚚 Free delivery over ₹4,000 pan-India · we also ship worldwide · Buying in bulk? Get a quote in 24 hours →
ABB 220-250 V · TCS Relay · DC/AC1NO+1NC+2CO↓ 2% off MRP
BrandABB
CategorySwitchgear
SpecificationTCS Relay, 220-250V DC/AC1NO+1NC+2CO
AvailabilityOut of stock
DeliveryPan-India · 7 working days
ABB· Out of stock
Visit the ABB store

ABB 220-250 V · TCS Relay · DC/AC1NO+1NC+2CO

₹6,946/pcincl. GST-2%
₹5,886 + 18% GST · MRP ₹7,088
Out of stock

We list this so you can see the spec and our price, but it cannot be ordered right now. Email info@elumenuvo.com and we will source it for you.

💳 30 Day credit facility available launching soon - join waitlist.

ABB 220-250 V · TCS Relay · DC/AC1NO+1NC+2CO: Elume price today ₹6,946 per pc incl. GST, 2% below the ₹7,088 MRP. The price has held steady for the last 30 days.

Price history
Elume price over time, day by day. Market comparison appears once we track this item.
25 May to 22 Nov
₹7,584₹7,226₹6,868₹6,510₹6,152₹7,088₹6,946
May 26Jun 26Aug 26Sep 26Oct 26Nov 26Nov 26
Elume today
₹6,946
MRP
₹7,088
Lowest in view · 10 Aug
₹6,615
Highest in view · 3 Oct
₹6,946
🏷️
100% genuine
Brand-authorised stock with full manufacturer warranty
🧾
GST invoice
Tax invoice on every order · GST billing with tax split
🚚
Pan-India delivery
7 working days to your location
📦
Wholesale built in
Wholesale price at 15+ units: ₹6,599/pc on this product, applied automatically

ABB TCS Relay, 220-250V DC/AC1NO+1NC+2CO (ABB article a9dfff45) belongs to ABB's MV Relays range, listed under . Sold by Elume with a GST invoice and delivery across India.

As published by ABB. Verify critical parameters against the datasheet before specifying.
ABB ABB 220-250 V · TCS Relay · DC/AC1NO+1NC+2CO
Device typeMiniature circuit breaker (MCB)
Reference standardIS/IEC 60898-1
BrandABB
ELINEC4KPHD99H
Sold asPer pc
Read: Contactor Sizing for 400 V and 415 V Motors: kW to Amps, AC-3 Ratings and Overload Relays →
What size contactor do I need for a 7.5 kW motor?
A 7.5 kW three-phase motor at 400 V draws about 14.5 A, so a contactor rated at least 16 to 18 A at AC-3 is the usual choice, with an overload relay set to the nameplate current.
What is the difference between AC-1 and AC-3?
AC-1 is the rating for resistive loads such as heaters; AC-3 is the rating for switching squirrel-cage motors in normal duty. Motors are always sized on the AC-3 figure, which is lower.
How many amps per kW for a three-phase motor?
At 400 V, roughly 2 A per kW for small motors, falling towards about 1.8 A per kW above 30 kW, because larger motors run at a better power factor and efficiency. Use the nameplate for the exact figure.
What is the difference between on-delay and off-delay timers?

An on-delay timer switches its output after the set time once it receives power or a start signal, while an off-delay timer holds its output on for the set time after the signal is removed. Multifunction timers offer both and other modes such as cyclic and interval.

Which timer do I need for a star-delta starter?

A dedicated star-delta timer has a built-in short dead time between star and delta changeover to prevent a short circuit across contactors. The star time is set to suit how fast the motor reaches near full speed, often a few seconds to around 15 seconds.

What does a phase failure relay protect against?

A phase monitoring relay detects phase loss, phase reversal (wrong sequence) and often phase unbalance or under/over voltage, and trips the contactor coil to protect three-phase motors. It is especially useful for pumps, compressors and lifts where wrong rotation or single phasing can cause damage.

Can I use a timer to run a water pump automatically?

A cyclic or programmable timer can switch a pump contactor on and off at set intervals, but for tank level control a level controller relay with probes or a float switch is more reliable. The pump also needs proper motor protection like an MPCB or overload relay.

Do these mount on DIN rail?

Most modern timers and monitoring relays are DIN rail mounted (35mm), while some older or plug-in types use an 8-pin or 11-pin socket base. Check the mounting type and whether the base is included.

No reviews yet