🚚 Free delivery over ₹4,000 pan-India · we also ship worldwide · Buying in bulk? Get a quote in 24 hours →
ABB CV2D2J · Relay · 110 V DC · 2NO+2NC · 1MYN563627-DBC1MYN563627-DBC↓ 5% off MRP
BrandABB
CategorySwitchgear
SpecificationCV2D2J Relay, 110VDC, 2NO+2NC
Brand SKU1MYN563627-DBC
AvailabilityIn stock · ships in 24h
DeliveryPan-India · 7 working days
ABB· In stock
Visit the ABB store

ABB CV2D2J · Relay · 110 V DC · 2NO+2NC · 1MYN563627-DBC

₹5,900/pcincl. GST-5%
₹5,000 + 18% GST · MRP ₹6,195
Add to cart
Buy now
  • Secured by Razorpay · UPI, cards, net banking, wallets
  • GST invoice, claim input tax credit
  • Tracked delivery, 5 to 7 working days
✓ Full brand warranty on every order
✓Lowest price guarantee · found it cheaper? We match it.
💳 30 Day credit facility available launching soon - join waitlist.
₹5,900 /pc incl. GST
Free pan-India delivery

ABB CV2D2J · Relay · 110 V DC · 2NO+2NC · 1MYN563627-DBC: Elume price today ₹5,900 per pc incl. GST, 5% below the ₹6,195 MRP. The price has held steady for the last 30 days. The average price across the sellers we track is ₹4,720, ₹1,180 less than here. The lowest tracked seller lists it at ₹4,720, ₹1,180 below it (tell us and we match it).

Price history
Elume price vs the average market price across the sellers we track, day by day. Tap a legend entry to show or hide a line.
25 May to 22 Nov
₹6,629₹6,047₹5,465₹4,884₹4,302₹6,195₹5,900₹4,720
May 26Jun 26Aug 26Sep 26Oct 26Nov 26Nov 26
Elume today
₹5,900
Avg market price
₹4,720
MRP
₹6,195
Lowest in view · 10 Aug
₹4,626
Highest in view · 3 Oct
₹6,195
🏷️
100% genuine
Brand-authorised stock with full manufacturer warranty
🧾
GST invoice
Tax invoice on every order · GST billing with tax split
🚚
Pan-India delivery
7 working days to your location
📦
Wholesale built in
Wholesale price at 15+ units: ₹5,605/pc on this product, applied automatically
ABB ABB CV2D2J · Relay · 110 V DC · 2NO+2NC · 1MYN563627-DBC · 1MYN563627-DBC
Device typeMiniature circuit breaker (MCB)
Reference standardIS/IEC 60898-1
BrandABB
Brand SKU1MYN563627-DBC
ELINEGPMMHKKP9
Sold asPer pc
Read: Contactor Sizing for 400 V and 415 V Motors: kW to Amps, AC-3 Ratings and Overload Relays →
What size contactor do I need for a 7.5 kW motor?
A 7.5 kW three-phase motor at 400 V draws about 14.5 A, so a contactor rated at least 16 to 18 A at AC-3 is the usual choice, with an overload relay set to the nameplate current.
What is the difference between AC-1 and AC-3?
AC-1 is the rating for resistive loads such as heaters; AC-3 is the rating for switching squirrel-cage motors in normal duty. Motors are always sized on the AC-3 figure, which is lower.
How many amps per kW for a three-phase motor?
At 400 V, roughly 2 A per kW for small motors, falling towards about 1.8 A per kW above 30 kW, because larger motors run at a better power factor and efficiency. Use the nameplate for the exact figure.
What is the difference between on-delay and off-delay timers?

An on-delay timer switches its output after the set time once it receives power or a start signal, while an off-delay timer holds its output on for the set time after the signal is removed. Multifunction timers offer both and other modes such as cyclic and interval.

Which timer do I need for a star-delta starter?

A dedicated star-delta timer has a built-in short dead time between star and delta changeover to prevent a short circuit across contactors. The star time is set to suit how fast the motor reaches near full speed, often a few seconds to around 15 seconds.

What does a phase failure relay protect against?

A phase monitoring relay detects phase loss, phase reversal (wrong sequence) and often phase unbalance or under/over voltage, and trips the contactor coil to protect three-phase motors. It is especially useful for pumps, compressors and lifts where wrong rotation or single phasing can cause damage.

Can I use a timer to run a water pump automatically?

A cyclic or programmable timer can switch a pump contactor on and off at set intervals, but for tank level control a level controller relay with probes or a float switch is more reliable. The pump also needs proper motor protection like an MPCB or overload relay.

Do these mount on DIN rail?

Most modern timers and monitoring relays are DIN rail mounted (35mm), while some older or plug-in types use an 8-pin or 11-pin socket base. Check the mounting type and whether the base is included.

No reviews yet