Lauritz Knudsen MN 5 Thermal Overload Relay · 10 A · 30-50 A · 415 V AC coil · SS94136OOGO: Elume price today ₹6,062 per pc incl. GST, 24% below the ₹7,991 MRP. The price has held steady for the last 30 days.
Lauritz Knudsen MN 5 Thermal Overload Relay · 10 A · 30-50 A · 415 V AC coil is a thermal overload relay from Lauritz Knudsen. It trips the contactor when a motor draws more than its set current for too long, protecting the motor against overload and single phasing. Key ratings: Rated current 10 A, Setting range 30-50 A, Rated voltage 415 V AC, Mounting Direct mounting on MNX 50-80 contactors. It is built to IS/IEC 60947-4-1.
Set it to the motor's full-load current from the nameplate, not higher. In a star-delta starter where the relay is in the phase winding circuit, it is set to about 0.58 times the full-load current.
Most overload relays are designed to mount directly on specific contactor sizes of the same brand and range. For other brands or sizes, a separate mounting kit or panel mounting is needed, so check the compatibility list.
Most modern thermal overload relays have differential (single phasing) sensitivity and trip faster when one phase is lost, which helps protect three-phase motors. For full phase failure and phase reversal protection, a phase monitoring relay is also recommended.
Trip class indicates the maximum time to trip from cold at 7.2 times the set current: class 10 trips within 10 seconds and class 20 within 20 seconds (IS/IEC 60947-4-1). Class 10 suits normal motors, while class 20 or 30 is used for heavy-starting loads like crushers and fans with large inertia.
In manual reset, someone must press the reset button after a trip, while auto reset lets the relay reset itself once it cools. Manual reset is generally safer, since the motor will not restart unexpectedly.