🚚 Free delivery over ₹4,000 pan-India · we also ship worldwide · Buying in bulk? Get a quote in 24 hours →
Lauritz Knudsen MN 5 Thermal Overload Relay · 10 A · 20-33 A · 415 V AC coil · SS94136OOEOSS94136OOEO↓ 20% off MRP
BrandLauritz Knudsen
CategoryIndustrial Control
SpecificationThermal Overload Relay · 10 A · 20-33 A · 415 V AC · Direct mounting on MNX 50-80 contactors
Brand SKUSS94136OOEO
AvailabilityIn stock · ships in 24h
DeliveryPan-India · 7 working days
Lauritz Knudsen· In stock
Visit the Lauritz Knudsen store

Lauritz Knudsen MN 5 Thermal Overload Relay · 10 A · 20-33 A · 415 V AC coil · SS94136OOEO

Relay Range: 20-33A
₹4,837/pcincl. GST-20%
₹4,099 + 18% GST · MRP ₹6,017
Add to cart
Buy now
  • Secured by Razorpay · UPI, cards, net banking, wallets
  • GST invoice, claim input tax credit
  • Tracked delivery, 5 to 7 working days
✓ Full brand warranty on every order
✓Lowest price guarantee · found it cheaper? We match it.
💳 30 Day credit facility available launching soon - join waitlist.
₹4,837 /pc incl. GST
Free pan-India delivery

Lauritz Knudsen MN 5 Thermal Overload Relay · 10 A · 20-33 A · 415 V AC coil · SS94136OOEO: Elume price today ₹4,837 per pc incl. GST, 20% below the ₹6,017 MRP. The price has held steady for the last 30 days.

Price history
Elume price over time, day by day. Market comparison appears once we track this item.
25 May to 22 Nov
₹6,438₹5,900₹5,361₹4,823₹4,285₹6,017₹4,837
May 26Jun 26Aug 26Sep 26Oct 26Nov 26Nov 26
Elume today
₹4,837
MRP
₹6,017
Lowest in view · 17 Aug
₹4,607
Highest in view · 3 Oct
₹4,837
For panel builders
Buying this for a panel?
The price above is for a single piece. Send the whole BOM in any file and a person quotes the job within 24 hours.
🏷️
100% genuine
Brand-authorised stock with full manufacturer warranty
🧾
GST invoice
Tax invoice on every order · GST billing with tax split
🚚
Pan-India delivery
7 working days to your location
📦
Wholesale built in
Wholesale price at 15+ units: ₹4,595/pc on this product, applied automatically

Lauritz Knudsen MN 5 Thermal Overload Relay · 10 A · 20-33 A · 415 V AC coil is a thermal overload relay from Lauritz Knudsen. It trips the contactor when a motor draws more than its set current for too long, protecting the motor against overload and single phasing. Key ratings: Rated current 10 A, Setting range 20-33 A, Rated voltage 415 V AC, Mounting Direct mounting on MNX 50-80 contactors. It is built to IS/IEC 60947-4-1.

  • Built-in single phasing protection
  • Manual and automatic reset
  • Ambient temperature compensated
As published by Lauritz Knudsen. Verify critical parameters against the datasheet before specifying.
Lauritz Knudsen Lauritz Knudsen MN 5 Thermal Overload Relay · 10 A · 20-33 A · 415 V AC coil · SS94136OOEO · SS94136OOEO
Device typeThermal overload relay
SeriesMN 5
Rated current10 A
Setting range20-33A
Rated voltage415 V AC
MountingDirect mounting on MNX 50-80 contactors
Reference standardIS/IEC 60947-4-1
BrandLauritz Knudsen
Brand SKUSS94136OOEO
ELINEM6H9CK34J
Sold asPer pc
Ratings as published by Lauritz Knudsen (Lauritz Knudsen price list Aug 2026; Product name; Lauritz Knudsen smartshop; Elume catalogue). Verify critical parameters against the datasheet before specifying.
What should I set the overload relay to?

Set it to the motor's full-load current from the nameplate, not higher. In a star-delta starter where the relay is in the phase winding circuit, it is set to about 0.58 times the full-load current.

Will this overload relay fit my contactor?

Most overload relays are designed to mount directly on specific contactor sizes of the same brand and range. For other brands or sizes, a separate mounting kit or panel mounting is needed, so check the compatibility list.

Does it protect against single phasing?

Most modern thermal overload relays have differential (single phasing) sensitivity and trip faster when one phase is lost, which helps protect three-phase motors. For full phase failure and phase reversal protection, a phase monitoring relay is also recommended.

What is trip class 10 and class 20?

Trip class indicates the maximum time to trip from cold at 7.2 times the set current: class 10 trips within 10 seconds and class 20 within 20 seconds (IS/IEC 60947-4-1). Class 10 suits normal motors, while class 20 or 30 is used for heavy-starting loads like crushers and fans with large inertia.

What is the difference between manual and auto reset?

In manual reset, someone must press the reset button after a trip, while auto reset lets the relay reset itself once it cools. Manual reset is generally safer, since the motor will not restart unexpectedly.

No reviews yet